Description
Consistency is key. Life happens and sometimes your training may suffer as a result. Quit letting life take away from your biggest health benefit in weight lifting – build your home gym to stay consistent with your training, even when life intervenes.
Your space saving solution to becoming a home gym owner, this bundle includes the Elite Lean Garage Rack that is mounted to your wall to maximize and optimize your available space without sacrificing strength.
The Ultimate Storage Gym Bundle also includes wall mounted storage racks for your weight plates and barbells – this is truly the ultimate space saving home gym bundle.
With a small but sturdy flat bench and premium 45lb Elite Barbell, you will be able to start training no matter where you are. Choose the total amount of weight needed for your training, select a color for your rack and bench, then we'll deliver your gym to your doorstep.
230lb Weight Plate Set Includes: Pair of 10s, 25s, 35s, and 45lb Bumper Plates.
260lb Weight Plate Set Includes: Pair of 10s, 15s, 25s, 35s, and 45lb Bumper Plates.
500lb Weight Plate Set Includes: Two Pairs of 10s, two pairs of 25s, and four pairs of 45s.
Ultimate Storage Gym Bundle Includes:
Elite Lean Wall Rack
- This rack was crafted from premium heavy-duty steel, utilizing 3” x 3” laser cut uprights and extended J-Hooks rated at a 1,000lb capacity to always remain sturdy for optimal safety.
- Laser cut from thick and heavy 11-gauge steel to prevent movement or tipping.
- 3"x 3" extended premium J-Hooks rated to a 1,000lb capacity are included with the Elite Lean Wall Rack.
- The Elite Lean Wall Rack includes a comfortable, standard pull-up bar that is 30” away from the wall and 8’ from the ground which can be adjusted in 6” increments.
- Fly Away Attachment mounting plates crafted from very thick 7-gauge steel.
- Featuring wobble-free stability due to the premium USA sourced steel used to craft the Elite Lean Wall Rack, you will never have to worry about movement during your training.
- This rack can be installed level, even when garage floors may not be level.
- 100% sourced and produced in the USA for extreme quality.
- One of the quickest and easiest wall mounted racks to assemble on the market.
- Watch the assembly video here.
- Weight: 140lbs
- Material: Steel
- Capacity: 1,000lbs
- Height: 96" (w/ pull up bar)
- Width: 48"
- Length: 4.75"
- Assembly: Bolt
- Coating: Powder
- Warranty: Lifetime (welds)
- Brand: Wright Equipment
Cerakote Elite Bar
- 201,000 PSI tensile strength.
- Can safely handle up to 1,500lbs.
- Made in the USA.
- Needle Bearings are able to withstand 2-8 times more load than ball bearings or cylindrical roller bearings.
- Each barbell incorporates 8 German 28mm bearings.
- This barbell must pass a detailed 32 point check list inspection before arriving at your door.
- Machined to a precise ±.001" tolerance.
- Cerakote is a ceramic and polymer coating that increases durability by resisting rust.
- This barbell is finished with black cerakote, while the sleeves are bright zinc.
- Bar Weight: 20kg
- Diameter: 28mm
- Center Knurl: No
- Knurl Marks: Dual
- Shaft Coating: Black Cerakote
- Total Length: 2200mm (86.6")
- Distance between sleeves: 51.5"
- Loadable Sleeve Length: 16.40"
- Sleeve Coating: Zinc
- Bushing Design: German Bearings 8
- Assembly: Snap Ring
- Tensile Strength: 201,000
- Guarantee/Warranty: Lifetime*
- Made in the USA
- SKU: WRI-WEB
- Brand: Wright Equipment
- Bar Use: Weightlifting, Olympic Weightlifting, Powerlifting, Multipurpose
AMP Bumper Plates
- All plates are a true 450 mm diameter.
- Featuring a 2" stainless steel center insert shaped to the bumper to properly distribute the force of the bar when dropped.
- Low bounce.
- All weight plates are precisely crafted and measured to be within +/- 0.5LB of the stated weight so your lifts are always accurate.
- Crafted with recycled rubber and stainless steel in the United States.
- Every 2lb - 5lb bumper plate is tested to exceed 20,00 drops from 6 feet.
- Every 10lb and 15lb weight plate is tested to 7,000 drops.
- Can be used outside.
- 1-year warranty on 25, 35, 45, 55, and 10lb plates.
- 80 day warranty on 5, 10, and 15LB plates.
Bumper Plate Thickness:
- 55LB Plate Width: 3.6"
- 45LB Plate Width: 3.00"
- 35LB Plate Width: 2.50"
- 25LB Plate Width: 1.75"
- 15LB Plate Width: 1.50"
- 10LB Plate Width: 1.25"
- 5LB Plate Width: 1.75"
* Five AMP 45lb weight plates can fit onto a standard Olympic barbell.
Plate Storage
- Keep those new weight plates in pristine condition by keeping them off the floor and out of the way.
- The Plate Storage Wall Mount comes with 3 pegs.
- Each peg can hold 1-25lb and 4- 45lb bumper plates for a total of 615lbs.
- The length of the weight plate storage wall mount is 44 inches.
- Each of the pegs is 10.5 inches from the wall.
- 42" long.
- 1/4" steel plate.
- Schedule 40 pipe- 10" long and 20" apart.
- Welded.
- 4 1/2 bolt holes.
- *MOUNTING HARDWARE NOT INCLUDED*
- 3/8 x 4 lags with washers are recommended.
- 1/4" pilot hole for wood studs recommended.
Flat Bench
- The Wright Flat Bench was built for comfort with a 44” x 11 1/4” pad that provides a soft padding while performing your lifts.
- Convenient wheels make this bench easy to move around and store as desired.
- Weight: 40lbs
- Upright: 14ga/11ga steel
- Material: Steel/Foam/Naugahyde
- Coating: Standard Black
- Height: 18"
- Width: 24"
- Length" 48"
- Assembly: Bolt
- Made In USA: Yes
Barbell Storage
- from 1/8" Steel.
- Why store barbells on the wall? We have found that this is a better option for longevity as the barbell is not hitting the ground inside of traditional floor barbell holders.
- Able to hold 2 barbells.
- *MOUNTING HARDWARE NOT INCLUDED*
- Material : 11ga Steel
- Coating : Powder Coat
- Height : 4"
- Length : 7"
- Width : 4"
- Assembly : Lag Bolt (not included)
- Weight : 2lb
- Warranty : Lifetime Welds
- Made In USA : Yes
Consider Adding...
View details
